No O
M
Sensor Attached
XI
AX
Turning the Backlight On or Off
N-600x Operator's Manual
Upon successful completion of the POST process, the monitor
sounds a one-second tone indicating that the monitor has passed
the POST.
or
The monitor displays dashes [ - - - ] and the Pulse Search indicator
is not lit, indicating the monitor failed to detect an O
You can turn off the backlight by pressing the LIGHT softkey and
then pressing OFF.
Note: Any of the following conditions turn on the backlight:
•
pressing any of the softkeys
•
pressing and holding the HELP/CONTRAST button
Using the Monitor
M
sensor.
XI
AX
49