Table of Contents
Advertisement
OXIMAX Sensors and Accessories
O
M
sensor application errors, and certain patient
XI
AX
conditions.
WARNING: Do not immerse or wet the O
M
sensor.
XI
AX
Caution: The O
M
sensor disconnect error message and
XI
AX
associated alarm indicate that the O
M
sensor is either
XI
AX
disconnected or the wiring is faulty. Check the O
M
XI
AX
sensor connection and, if necessary, replace the O
M
XI
AX
sensor, pulse oximetry cable, or both.
Caution: Adhesive O
M
sensors are intended for single-
XI
AX
patient use only. Do not transfer an adhesive sensor
containing sensor trend data from one patient to a second
patient. Doing so may result in data from the first patient
being used to evaluate the second patient.
Note: Physiological conditions, medical procedures, or external
agents that may interfere with the pulse oximeter's ability to
detect and display measurements include dysfunctional
hemoglobin, arterial dyes, low perfusion, dark pigment, and
externally applied coloring agents such as nail polish, dye, or
pigmented cream.
A Sensor Accuracy Grid listing all of the O
M
sensors used with
XI
AX
the N-600x is available on the Internet at:
www.covidien.com/rms
When selecting an O
M
sensor, consider the patient's weight
XI
AX
and activity level, the adequacy of perfusion, and the available
O
M
sensor sites, the need for sterility, and the anticipated
XI
AX
duration of monitoring. For more information refer to Table 10 or
contact your local Nellcor representative. Refer to OxiMax Sensor
N-600x Operator's Manual
117
- Quick Links:
- Error Codes
Hide quick links:
Advertisement
Table of Contents
