Selecting An Oximax Sensor - Covidien Nellcor OxiMax N-600x Operator's Manual

OXIMAX Sensors and Accessories
Selecting an O M
XI
116
Sensor
AX
WARNING: Before use, carefully read the O
directions for use, including all warnings, cautions, and
instructions.
WARNING: Do not use a damaged O
oximetry cable. Do not use an O
optical components.
WARNING: Use only Nellcor-approved O
pulse oximetry cables with this pulse oximeter. Other
sensors or pulse oximetry cables may cause improper
N-600x performance.
WARNING: Do not attach any cable to the O
port connector that is intended for computer use.
WARNING: Tissue damage can be caused by incorrect
application or duration of use of an SpO
Inspect the O M sensor site periodically as directed in
XI AX
the O M sensor directions for use.
XI AX
WARNING: Do not lift the pulse oximeter by the pulse
oximetry cable or power cord because the cable or cord
could disconnect from the pulse oximeter, causing the
pulse oximeter to drop on the patient.
WARNING: Pulse oximetry readings and pulse signal can be
affected by certain ambient environmental conditions,
M sensor
XI AX
M sensor or pulse
XI AX
M sensor with exposed
XI AX
M sensors and
XI AX
M sensor
XI AX
O M sensor.
2 XI AX
N-600x Operator's Manual