Subaru Legacy 2003 Service Manual page 3879

SECURITY AND LOCKS
11.Rear Door Lock Actuator
A: REMOVAL
1) Remove the rear door latch assembly. <Ref. to
SL-25, REMOVAL, Rear Door Latch Assembly.>
2) Remove the bolt. Remove the rear door lock ac-
tuator.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installation.
C: INSPECTION
1) Disconnect the door lock actuator harness con-
nector.
2) Connect the battery to the door lock actuator ter-
minals.
2 1
4 3
Terminal No.
No. 2 (+) and No. 4 (–)
No. 4 (+) and No. 2 (–)
If NG, replace the door lock actuator.
REAR DOOR LOCK ACTUATOR
SL-00080
2 1
4 3
SL-00076
Actuator operation
Unlocked → Locked
Locked → Unlocked
SL-26