Immobilizer Control Module - Subaru Legacy 2003 Service Manual

IMMOBILIZER CONTROL MODULE

SECURITY AND LOCKS
20.Immobilizer Control Module
A: REMOVAL
NOTE:
The following positions for removal and installation
are for LHD models. The positions for RHD models
are symmetrically opposite.
1) Disconnect ground cable from battery.
2) Remove instrument panel lower cover. <Ref. to
EI-35, REMOVAL, Instrument Panel Assembly.>
3) Disconnect connector from immobilizer control
module.
4) Remove immobilizer control module.
SL-00121
B: INSTALLATION
Install in the reverse order of removal.
SL-36