Subaru Legacy 2003 Service Manual page 3669

SEAT BELT SYSTEM
B: INSTALLATION
1. OUTER BELT (FRONT)
Install in the reverse order of removal.
CAUTION:
• The parts on left and right are not identical.
Before installation, make sure that the correct
part is used.
• Be careful not to twist belts during installa-
tion.
2. INNER BELT (FRONT)
Install in the reverse order of removal.
Tightening torque:
Refer to COMPONENT in General Descrip-
tion. <Ref. to SB-2, FRONT SEAT BELT,
COMPONENT, General Description.>
C: INSPECTION
1. OUTER BELT (FRONT)
Check for the following, and replace with new parts
if necessary.
• Pretensioner is cracked or deformed.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
2. INNER BELT (FRONT)
Check for the following, and replace with new parts
if necessary.
• Inner belt is deformed or damaged.
• Seat belt buckle is engaged improperly.
FRONT SEAT BELT
SB-8