Subaru Legacy 2003 Service Manual page 3967

FENDER PANEL
EXTERIOR BODY PANELS
3. Fender Panel
A: REMOVAL
1) Disconnect ground cable from battery.
2) Remove side sill spoilers. <Ref. to EI-29, RE-
MOVAL, Side Sill Spoiler.>(If fitted)
3) Remove side protectors and fender protectors.
(OUTBACK)
4) Remove front bumper face. <Ref. to EI-14, RE-
MOVAL, Front Bumper.>
5) Remove headlights. <Ref. to LI-15, REMOVAL,
Headlight Assembly.>
6) Remove mud guard. <Ref. to EI-22, REMOVAL,
Mud Guard.>
7) Remove bolts and clips to remove front fender.
EB-00050
B: INSTALLATION
1) Install in the reverse order of removal.
2) When fender panel is installed, clearance be-
tween fender panel and hood or front fender must
be equal.
Tightening torque:
7.35 N·m (0.75 kgf-m, 5.4 ft-lb)
EB-10