Subaru Legacy 2003 Service Manual page 3741

ENTERTAINMENT
11.Antenna Amplifier
A: REMOVAL
1. SEDAN
1) Disconnect ground cable from battery.
2) Remove rear pillar upper trim. <Ref. to EI-40,
SEDAN, REMOVAL, Rear Quarter Trim.>
3) Disconnect harness connector and terminal.
4) Remove mounting screw and detach antenna
amplifier.
2. WAGON
1) Disconnect ground cable from battery.
2) Remove rear quarter lower trim. <Ref. to EI-40,
WAGON, REMOVAL, Rear Quarter Trim.>
3) Disconnect harness connector and terminal.
4) Remove mounting screw and detach antenna
amplifier.
ANTENNA AMPLIFIER
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. FOR EUROPE
Measure antenna amplifier resistance.
SEDAN:
WAGON:
ET-00030
2. EXCEPT FOR EUROPE
Measure antenna amplifier resistance.
SEDAN:
ET-00031
ET-12
–a
( 1 )
–b
( 1 )
( 1 )
( 2 )
( 3 )
( 1 )
–a
( 1 )
–b
( 1 )
Terminal No.
1-a and Amplifier
1-b and Amplifier
2 and Amplifier
3 and Amplifier
( 2 )
( 3 )
( 3 )
ET-00039
( 2 )
ET-00040
Standard
More than 100 kΩ
Less than 1 Ω
More than 100 kΩ
More than 100 kΩ
–a
( 1 )
–b
( 1 )
–c
( 1 )
–d
( 1 )
( 1 )
ET-00041