Subaru Legacy 2003 Service Manual page 3725

WIPER AND WASHER SYSTEMS
8. Front Washer Nozzle
A: REMOVAL
1) Remove the washer hose from the washer noz-
zle.
2) Open the clips on the underside of the hood with
a thin screwdriver or other tool, and remove the
washer nozzle.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the position of the washer liquid sprayer.
<Ref. to WW-14, ADJUSTMENT, Front Washer
Nozzle.>
C: INSPECTION
• Make sure the nozzle and hose are not clogged.
• Make sure the hose is not bent.
D: ADJUSTMENT
NOTE:
Adjustment positions for left-handed vehicle. Carry
out left-right symmetry for adjustment positions for
right-handed vehicle.
1) Turn wiper switch to OFF position.
2) When vehicle stops, adjust washer injection po-
sition as shown in the figure.
Injection position:
A: 350 mm (13.78 in)
B: 150 mm (5.91 in)
C: 300 mm (11.81 in)
D: 600 mm (23.62 in)
A
(1) Nozzle
FRONT WASHER NOZZLE
WW-00023
A
B B
C D
( 1 )
WW-00111
WW-14