Turn Signal And Hazard Light System - Subaru Legacy 2003 Service Manual

LIGHTING SYSTEM
5. Turn Signal and Hazard Light
System
A: SCHEMATIC
1. TURN SIGNAL LIGHT AND HAZARD
LIGHT LHD MODEL
<Ref. to WI-274, LHD MODEL, SCHEMATIC, Turn
Signal Light and Hazard Light System.>
2. TURN SIGNAL LIGHT AND HAZARD
LIGHT RHD MODEL
<Ref. to WI-276, RHD MODEL, Turn Signal Light
and Hazard Light System.>
B: INSPECTION
1. TURN SIGNAL SWITCH
<Ref. to LI-11, INSPECTION, Combination Switch
(Light).>
2. HAZARD SWITCH
Measure hazard switch resistance.
Switch position Terminal No.
OFF
1, 3 and 4
ON

TURN SIGNAL AND HAZARD LIGHT SYSTEM

4 3 2 1
8 7 6 5
LI-00002
Standard
Less than 1 Ω
6 and 7
Less than 1 Ω
Less than 1 Ω
7 and 8
3. TURN SIGNAL & HAZARD MODULE
Connect battery and turn signal light bulb to the
module, as shown in the figure. The module is
properly functioning if it blinks when power is sup-
plied to the circuit.
LI-6
LI-00003