Subaru Legacy 2003 Service Manual page 3899

SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
3. Sunroof Lid
A: REMOVAL
1. WAGON (FRONT)
1) Tilt-up the front sunroof (most upper position).
2) Remove sunroof switch. <Ref. to SR-14, RE-
MOVAL, Sunroof Switch.>
3) Remove two mounting bolts.
4) Detach covers (A) then remove two nuts from
tilt-up assembly.
5) Remove the sunroof lid carefully.
2. SEDAN AND WAGON (REAR)
1) Completely close rear sunroof lid and open sun-
shade.
2) Remove covers (A) then remove nuts (B).
3) Remove the sunroof lid carefully.
SUNROOF LID
( A )
SR-00020
( A )
( B )
SR-00021
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
When installing sunroof lid, be careful not to
pinch the lip (A) of lid.
C: ADJUSTMENT
1. ALIGNMENT OF HEIGHT BETWEEN
SUNROOF LID AND ROOF PANEL
Loosen sunroof lid installation nuts and then adjust
height by adding (max: two pieces) or extracting
(max: one piece) shims (B) (standard: one piece)
between sunroof lid (A) and body.
Difference in height between sunroof lid and
roof panel: L
L: 2.0 ± ± ± ± 0.5 mm (0.079 ± ± ± ± 0.020 in)
( B )
SR-6
( A )
SR-00022
( B )
( B )
L
( A )
SR-00023