Subaru Legacy 2003 Service Manual page 3728

Hide thumbs Also See for Legacy 2003:

Table of Contents

11.Rear Washer Nozzle

1) Remove the high-mount stop light. <Ref. to LI-

29, REMOVAL, High-mounted Stop Light.>

2) Remove the washer hose from the washer noz-

3) Open the clips on the underside of the rear gate

panel with a thin screwdriver or other tool, and re-

move the washer nozzle.

B: INSTALLATION

1) Install in the reverse order of removal.

2) Adjust the position of the washer liquid sprayer.

<Ref. to WW-17, ADJUSTMENT, Rear Washer

C: INSPECTION

• Make sure the nozzle and hose are not clogged.

• Make sure the hose is not bent.

D: ADJUSTMENT

1) Turn wiper switch to OFF position.

2) When vehicle stops, adjust washer injection po-

sition as shown in the figure.

Injection position:

A: 60 mm (2.36 in)

B: 42 ° ° ° °

REAR WASHER NOZZLE

WIPER AND WASHER SYSTEMS

Chapters

Table of Contents