C: DISASSEMBLY
1. STANDARD SEAT
1) Remove seats from vehicle. <Ref. to SE-7, RE-
MOVAL, Front Seat.>
2) Remove lumber lever cover.
3) Remove hook at bottom, and then remove seat
back board.
4) Remove hook on back side of seat, and remove
hog rings using a plier.
5) Remove clamp of side airbag wire harness.
(Side airbag equipped seat)
FRONT SEAT
6) Remove clamp of seat heater wire harness.
(Seat heater equipped seat)
7) Turn cover and cushion, and remove the two
bolts from hinge.
SE-00073
8) Remove hinge screw cover and screws, and re-
move seat back from hinge.
SE-00074
9) While picking up tip with a plier, remove head-
rest lock bushing.
SE-00075
SE-9
SEATS
SE-00076
SE-00077
SE-00078
SE-00079