Subaru Legacy 2003 Service Manual page 3944

13) Disconnect harness connectors and remove in-
strument panel carefully.
CAUTION:
Do not pull the harness when disconnecting the
connector.
NOTE:
• If necessary, make matching marks for easy re-
assembly.
• When storing the removed instrument panel,
place it standing up on the floor.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful not to snag the harness.
NOTE:
When setting the instrument panel into position,
push the three hooks into grommet (A) on the body
panel.
( A )
( A )
Tightening torque:
Refer to COMPONENT in General Descrip-
tion. <Ref. to EI-9, INSTRUMENT PANEL,
COMPONENT, General Description.>
INSTRUMENT PANEL ASSEMBLY
EI-00192
( A )
EI-00193
EI-37
EXTERIOR/INTERIOR TRIM