Subaru Legacy 2003 Service Manual page 3987

CRUISE CONTROL SYSTEM
7. Clutch Switch
A: REMOVAL
1) Disconnect ground cable from battery.
2) Disconnect the connector from the clutch switch,
and then remove the switch. <Ref. to CL-40, RE-
MOVAL, Clutch Switch.>
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Measure clutch switch resistance.
Switch Pedal
Released
Clutch
Depressed
If NG, replace the clutch switch.
CLUTCH SWITCH
CC-00023
Terminal No. Standard
Less than 1 Ω
1 and 2
1 and 2 More than 1 MΩ
CC-10