Subaru Legacy 2003 Service Manual page 3573

AIRBAG SYSTEM
12.Front Sub Sensor
A: REMOVAL
1) Turn ignition switch OFF.
2) Disconnect the ground cable from the battery,
and wait for at least 20 seconds before starting
work.
3) Remove front bumper. <Ref. to EI-14, REMOV-
AL, Front Bumper.>
4) Disconnect connector from front sub sensor.
5) Remove front sub sensor (A).
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Check for the following, and replace damaged
parts with new parts.
• Front sub sensor, mounting bracket, and con-
nector are damaged.
FRONT SUB SENSOR
AB-00189
( A )
AB-00190
AB-20