Subaru Impreza 2002 Service Manual page 2553

CLUTCH SYSTEM
B: INSTALLATION
1. EXCEPT RHD TURBO MODEL
Install in the reverse order of removal.
NOTE:
Bleed the clutch fluid. <Ref. to CL-38, Clutch Fluid
Air Bleeding.>
Tightening torque:
T1: 15 N·m (1.5 kgf-m, 10.8 ft-lb)
T2: 18 N·m (1.8 kgf-m, 13.0 ft-lb)
T3: 25 N·m (2.5 kgf-m, 18.1 ft-lb)
T1
T3
(A) Clutch pipe (LHD model)
(B) Clip
(C) Clutch hose
(D) Clutch pipe (RHD model)
CLUTCH PIPE AND HOSE
T1
T1
T2
TR0477
2. RHD TURBO MODEL
Install in the reverse order of removal.
NOTE:
Bleed the clutch fluid. <Ref. to CL-38, Clutch Fluid
Air Bleeding.>
Tightening torque:
T1: 7.5 N·m (0.76 kgf-m, 5.53 ft-lb)
T2: 8 N·m (0.8 kgf-m, 5.8 ft-lb)
T3: 15 N·m (1.5 kgf-m, 10.8 ft-lb)
T4: 18 N·m (1.8 kgf-m, 13.0 ft-lb)
T5: 25 N·m (2.5 kgf-m, 18.1 ft-lb)
T3
(A)
T3
(C)
(A) Clutch pipe
(B) Connector
(C) Clutch hose
C: INSPECTION
Check the pipes and hoses for cracks, breakage, or
damage. Check the joints for fluid leakage. If any
cracks, breakage, damage, or leakage is found, re-
pair or replace the applicable pipe or hose.
CL-36
T3
T1
T3
(A)
(B)
T5
T3
T4
(A)
T2
T5
TR0528