Important Safety Information - HySecurity StrongArm 14F Programming And Operations Manual

IMPORTANT SAFETY INFORMATION

WARNING!
To reduce the risk of injury or death:
1.
READ AND FOLLOW ALL INSTRUCTIONS.
Never let children operate or play with gate controls. Keep the remote control away from children.
2.
3.
Always keep people and objects away from the barrier arm. NO ONE SHOULD CROSS THE PATH OF THE
MOVING ARM.
Test the gate operator monthly. The barrier arm MUST reverse on contact with a rigid object or stop when an
4.
object activates the non-contact sensors. After adjusting the force of travel, retest the gate operator. Failure
to adjust and retest the gate operator properly can increase the risk of injury or death.
KEEP BARRIER ARM GATES PROPERLY MAINTAINED. Read the installation and operating manual. Have
5.
a qualifi ed service person make repairs to gate hardware.
The entrance is for vehicles only. Pedestrians must use a separate pathway that prevents contact with the
6.
barrier arm.
7.
SAVE THESE INSTRUCTIONS.
IDENTIFYING GATE OPERATOR CATEGORY AND UL 325 USAGE CLASS
The UL 325 standard covers gate operators. Within this safety standard several Usage Classes are described
that defi ne diff erent types of installations where gate operators can be applied. Some operators are restricted in
their usage application. Appropriate Usage Classes are shown in the Specifi cations.
Class I
Class II
Class III
Class IV
12
hysecurity.com | 800-321-9947
Class I: Barrier arm gates are NOT Intended for use in a location of
one to four single family dwellings or a parking area associated with
one to four single family dwellings.
Class II: Intended for use in a commercial location or building such as
a multi-family housing units (fi ve or more single family units) hotels,
garages, retail stores or other buildings servicing general public.
Class III: Intended for use in an industrial location or building such
as factories or loading docks or other locations not accessible by the
general public.
Class IV: Intended for use in guarded industrial locations or buildings
such as an airport security area or other restricted access location,
not servicing general public, in which access is monitored by security
personnel or via closed circuitry.
StrongArm Programming and Operations
MX3657-01 Rev. D ©2020