Run Mode; Viewing Operator Status Displays; Example Of Operator Status Displays - HySecurity StrongArmPark DC Programming And Operations Manual

r m
un ode
The Run Mode displays appear static when the operator is ready and waiting for a run command. When the
display is flashing "GATE OPENING" or "GATE CLOSING", a command has been received and the barrier
gate is in motion. The command may come from a variety of sources: a card reader, push-button remote,
or recognition of a vehicle passing over a loop detector. In all cases, the operator "runs" the motor when it
receives an operational command.
Three displays indicate the position or status of the barrier gate. The keypad entry used to access the User or
Installer menus, begins at one of these Run Mode displays.
HYSECURITY
GATE OPEN
OPEN CLOSE
PREV NEXT
Pressing Open,
Close, or Stop
causes the gate
to perform the
command.
NOTE: To access the User or Installer menus, the motor cannot be engaged and the barrier gate cannot be moving.
v o
IeWIng perator
Press the MENU button once and the operator status displays scroll past in two second intervals. Pertinent
information appears to provide a quick overview of the operator's status or configurations.
The type of information that may scroll across the display includes: software version, operator type (OT), gate
handing (LEFT HAND or RIGHT HAND), buss voltage, and life cycle counter.
HYSECURITY
V5.32
OPEN CLOSE STOP
PREV NEXT SELECT
www.hysecurity.com © 2017
STOP MENU RESET OPEN
SELECT PREV
s
tatus
MENU RESET OPEN
PREV

Example of Operator Status Displays

HYSECURITY
GATE CLOSED
CLOSE STOP MENU RESET
NEXT SELECT
Pressing Menu scrolls through operator status
displays and accesses the User Menu.
Note: Pressing the MENU button twice, bypasses
the operator status displays.
Run Mode Displays
d
IsplaYs
LEFT HAND
CLOSE STOP MENU RESET
NEXT SELECT
Display & Menu Options
Pressing Reset clears alerts or faults and
returns to Run Mode.
NOTE: Press Reset at any Run mode
status display to view the software version.
For example: h5.33
HYSECURITY
GATE STOPPED
OPEN CLOSE STOP MENU RESET
PREV NEXT SELECT
BULK
CHARGER STATE
OPEN CLOSE STOP MENU RESET
PREV NEXT SELECT
MX3650-01 Rev. D 21