12.2
Description
Access
Auto start
step-by-step
FlexLine plus, Tools
Startup Sequence
Through the Startup tool, it is possible to record a user-defined sequence of key
presses so that, after switching on the instrument, a particular screen can be displayed
after the Level & Plummet screen instead of the Main Menu. For example, the
general Settings screen for configuring the instrument settings.
1.
Select
Tools from the Main Menu.
2.
Select
Startup from the Tools Menu.
1.
Press Record in the Startup screen.
2.
Press Cont to confirm the information message and begin the recording
process.
3.
The next key presses are stored, up to a maximum of 64. To end the recording
press ESC.
4.
If the auto start Status is set to Active, the stored key presses will be executed
automatically after switching on the instrument.
The automatic start sequence has the same effect as pressing the keys manually.
Certain instrument settings cannot be made in this way. Relative entries such as auto-
matically setting EDM Mode: Precise&Fast upon switching on the instrument, are not
possible.
140