Start Up Sequence - Leica FlexLine TS02 User Manual

5.2
Description
Access
Auto start
step-by-step
Tools
Menu selection Description
Adjust Defines the time period from the last adjustment to when a
Reminder reminder message should display to do another adjustment.
Options are: Never, 2 weeks, 1 month, 3 months, 6 months,
12 months.
The message will display the next time the instrument is switched
on after the time period has been reached.

Start Up Sequence

Through the Startup tool, it is possible to record a user defined sequence of key
presses so that, after switching on the instrument, a particular screen can be
displayed after the Level/Plummet screen instead of the MAIN MENU. For example,
the general SETTINGS screen for configuring the instrument settings.
1. Select TOOLS from the MAIN MENU.
2. Select Startup from the TOOLS MENU.
1. Press RECORD in the AUTO START screen.
2. Press OK to confirm the information message and begin the recording process.
3. The next key presses are stored, up to a maximum of 16. To end the recording
press ESC.
4. If the auto start Status: is set to Active, the stored key presses will be executed
automatically after switching on the instrument.
FlexLine, 67