Set Wheel Id; Set Reference Pressure - Volvo FM Handbook

Set wheel ID

1 Select axle with ▲ and ▼
2 Confirm selected axle with "SELECT".
3 Select wheel with ▲ and ▼
4 Confirm selected wheel with "SELECT".
5 Current ID is shown.
6 Adjust "Newt ID".
Adjust the marked digit with ▲ and ▼
Confirm each selected digit with "SELECT".
7 Confirm change of ID with "SELECT".
Press "Esc" to return to previous digit, row or menu.

Set reference pressure

1 Select axle with ▲ and ▼
2 Confirm selected axle with "SELECT".
3 Current value is shown
4 Adjust "New value".
Adjust the marked digit with ▲ and ▼
Confirm each selected digit with "SELECT"
5 Confirm reference pressure with "SELECT"
Press "Esc" to return to previous digit, row or menu.
Information display
Note!
The data in the display can vary
depending on how many axles and
tyre pressure sensors are fitted to the
truck.
Note!
It is only possible to read off the tyre
pressure when the truck is stationary.
57