General Information About Oils And Greases - Volvo FM Handbook

Hide thumbs Also See for FM:
Table of Contents

Advertisement

6
Combination screwdriver (extra equipment)
7
Socket wrench for tilting cab
8
Crank handle
9
Jack
10
Opening lever for changing tyres (only trucks
with
spoked wheels)
11
Closing lever for changing tyres (only trucks with
spoked wheels)
12
Socket wrench for changing wheels (only trucks
with spoked wheels)
13
Handle for changing wheels (only trucks with
spoked wheels)
14
Drawbar for towing

General information about oils and greases

Lubricating service is very important when it comes to
service and maintenance of the truck. Vehicle
components such as the engine, gearbox, rear axles,
etc., must be lubricated with either oil or grease. The
following information about oils and greases is
important. Your Volvo dealer has more information on
the complete range of Volvo lubricants.
Oils
For components that are lubricated with oil, the grade,
viscosity and service interval are very important. The
type of oil to be used for a specific component
depends on the oil's grade and viscosity. This
information can be found on the container and/or on
the oil's product information sheet. When a specific
part number is recommended, the part will always
have the correct grade and viscosity for the purpose.
Synthetic oil
Synthetic oil is being used increasingly for the
lubrication of vehicles. The raw material for these oils
is the same as for mineral based oils, raw oil, but the
Maintenance 523

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fh

Table of Contents