Table of Contents
Advertisement
5
Press in the lower part of the switch.
The indicator lamp in the switch lights up.
6
Fit the socket spanner (3) in the switch (2).
7
Turn the switch (2) clockwise to stop.
8
Hold the switch (2) in the stop position until the
cab is completely tilted.
9
Release the switch (2).
Tilting back
1
Fit the socket spanner (3) into the valve of the
hydraulic pump (1).
2
Turn anticlockwise to the stop position. The
valve is open.
3
Fit the socket spanner (3) in the switch (2).
4
Turn the switch (2) clockwise to stop.
5
Keep the circuit breaker (2) in the stop position
until the cab has been tilted completely back and
is locked in driving position.
6
Release the switch (2).
7
Check that the lamp showing unlocked cab does
not light up when the engine is running.
8
Put the tools away.
9
Push in the upper part of the switch.
If the cab is tilted electrically more than twice running
an overheating protection can be activated. Therefore
Cab 357
Open valve (drive position)
J0008203
J0008202
J0008204
J0008208
Advertisement
Table of Contents
