Tying Down The Truck On A Ferry - Volvo FM Handbook

182 Driving
Disengage the drive train power take-off
temporarily
1 Move the gear shift lever to N
2 HS is shown in the display (High range lock-up
Standby)
3 Re-engage by moving the gear shift lever to
position A or M
4 The display shows HR again
Disengage the drive train power take-off
1 Reduce the engine speed to idling
2 Move the gear shift lever to N
3 Apply the parking brake
4 Disengage the power take-off
5 HD is shown in the display (High range lock-up
Disengaging)
6 Wait until HD is no longer shown in the display
7 It is now possible to drive the vehicle. If HD
remains in the display, it may be due to the
parking brake not being applied.
Incorrect usage
If engaging and disengaging is not done correctly, an
H is shown in the display. The gearbox selects neutral.
Try one of the following measures:
• Apply the parking brake
• Move the gear shift lever to N
• Disengage the power take-off
• Turn off the engine and restart it

Tying down the truck on a ferry

When the vehicle is to be lashed for ferry transport, the
air bellows must first be completely emptied and then
the air suspension system shut off.