Table of Contents
Advertisement
142 Driving
Engage the differential lock between all wheel-
pairs
1
Set the switch to the lower position
2
Wait until the control lamp in the instrument
panel flashes
The differential locks between all wheel-pairs are
engaged
3
Accelerate with care so as not to damage the
drive shafts and gears
4
Drive away from the slippery area
5
Release the accelerator pedal
6
Disengage the differential lock
Lower position, differential lock in
transfer gearbox and rear axles
engaged. The axle differential lamp
flashes and the lamp for the transfer
gear
comes on
Note!
The differential lock is not engaged
until the warning lamp in the
instrument panel flashes. The
differential lock is engaged as long
as the warning lamp is flashing,
even if the switch is turned off.
J4017790
Advertisement
Table of Contents
