Table of Contents
Advertisement
Warning messages
When this symbol lights up, the fault indicated should
be checked before driving. If no other warning lamp
lights to indicate the fault, contact the workshop. Fault
codes are obtained from the diagnostic menu, refer to
section "Fault diagnosis".
Stop message
Acknowledge messages
The message lamp goes out when "Esc" is pressed.
Both warning and stop messages can be
acknowledged. Messages which have been
acknowledged but which are active are shown again
when the starter key is turned to starting position.
Warning message: Warning messages can be
acknowledged with "Esc". This warning is
Information display
Warning!
When this symbol lights up, the
vehicle should be stopped
immediately and the engine
switched off. If the vehicle is not
stopped and the engine turned off,
there will be serious
consequences for the vehicle,
driver or load. Contact a
workshop. Fault codes are
obtained from the diagnostic
menu, refer to section "Fault
diagnosis".
83
J3014365
J3014364
Advertisement
Table of Contents
