Table of Contents
Advertisement
Cruise control
Depress the brake pedal for a couple of seconds after
starting the engine otherwise the cruise control will not
function.
Engage the cruise control
The slide switch for cruise control is on the direction
indicator.
1
Move the slide switch (B) to the ON position.
2
When the required speed has been attained press
SET (A).
The required speed is attained either by using the
accelerator in the usual way or by increasing or
decreasing speed with + or - on SET.
When cruise control is in operation, this is indicated
on the display by "CC" or by an indicator lamp.
The cruise control cannot be engaged at speeds below
30 km/h.
To disengage cruise control
Depress the brake pedal or the clutch pedal or push the
slide switch (B) to OFF.
Return to the previous speed by pushing the slide
switch (B) to RESUME and release. (This is valid as
long as the speed exceeds 15 km/h when the slide
switch (B) is depressed).
The cruise control is not disengaged if the accelerator
pedal is depressed. When the accelerator is released,
the truck returns to the set speed.
Driving 169
Caution!
Do not use the cruise control in
hilly terrain, heavy traffic or on
slippery roads.
Note!
Make a habit of using one of the foot
pedals to disengage cruise control in
order to be able to react as quickly as
possible in the event of a critical
situation.
J0008305
Advertisement
Table of Contents
