Table of Contents
Advertisement
404 Radio/CD
7
Push the "OK" button to set the hour and toggle
to the minute adjustment.
8
Push Up button or Down button to adjust the
minutes up or down respectively.
9
Push the "OK" button to save the time and finish
the process.
Anti Theft Code (Guard)
The radio unit is set to function with only one vehicle.
The Guard feature prohibits operation of the radio
anywhere else. The Guard is automatic and no manual
handling is normally needed.
In case of malfunction
If, by some reason, the radio fails in detecting the
required vehicle, the user will be prompted to enter the
Anti Theft Code (sticker found in Drivers Handbook).
The display will then show "CODE 0000". Please note
that this is a malfunction and should be checked at an
authorized workshop. To enter the code, do the
following:
1
For the current (blinking) digit, turn the volume
knob until the right number is shown.
2
Press the power button to enter the digit.The next
digit will start to blink.
3
Repeat step 1 and 2 until all four digits has been
entered.
The user has three tries to enter the code. If these are
unsuccessful the radio will be locked for 60 minutes
until three new tries are allowed.
Deactivating Guard
It is possible to deactivate Guard, but (is) not
recommended. To deactivate the Guard function, do
the following:
1
Push the "MENU" button.
2
Push Up button or Down button until
"ADVANCE" is displayed.
Advertisement
Table of Contents
