Table of Contents
Advertisement
594 Maintenance
Disc wheel
1
Clean and lubricate the wheel bolt threads with
oil only
2
Clean the contact surfaces of the wheel, brake
drum and hub
3
Release the brakes (Otherwise the brake drum
can become oval.)
4
Torque tighten the wheel nuts to 200 ±8 Nm.
Tightening sequence according to illustration
5
After torque tightening, angle tighten the wheel
nuts 90°±10°. Tightening sequence according to
illustration. Check-tighten the wheel nuts after
driving the vehicle a short distance (approx. 200
km)
Tightening order, disc wheels
Note!
If the torque when re-tightening is
less than 670 Nm on any of the
wheel nuts, then all the wheel nuts
must be released and then be torque-
tightened and angle tightened
according to the tightening
sequence . Every 6 months: Check
and re-tighten all wheel nuts
irrespective of whether the wheel has
been removed or not.
Note!
Note that the size of the wheel bolts
is M22x1.5, and not 7/8"-14 with a
UNF thread as on older Volvo
models.
J0008154
Advertisement
Table of Contents
