Table of Contents
Advertisement
Information display
90
Voltmeter/Ammeter
Voltage values less than 20.0 V are presented as LOW
if the engine speed is less than 800 rpm for 10
minutes. Voltage values higher than 30.0 V are
presented as HIGH.
Fuel consumption
For setting the units, see section "Units".
1
Average fuel consumption:
The value is presented as a figure and an arrow
pointing down, (e.g. ø26.) During a time after
resetting the display shows "— — — " while
average fuel consumption is calculated.
2
Instantaneous fuel consumption:
The value is presented numerically as well as in
the form of a bar.
Resetting, fuel consumption
To reset all fuel data, depress "SELECT" for 1 second.
Leg data
The amount of fuel consumed since the last reset.
Resetting, leg data
To reset all fuel data, depress "SELECT" for 1 second.
Note!
At idle, no bar is shown and the fuel
consumption is displayed in litre/hr
(alternatively gallons/hr).
J3008832
J3014498
J3013617
Advertisement
Table of Contents
