Checking Electrolyte Level In Batteries - Volvo FM Handbook

Checking electrolyte level in batteries

The level should be 5 – 10 mm above the plates.
Fill with battery water if required. Do not fill more
than 10mm above the cell plates.
Maintenance 549
Note!
Battery electrolyte contains
corrosive sulfuric acid. Remove
electrolyte spill immediately from
skin. Wash with soap and plenty of
water. Seek medical help if the
electrolyte comes into contact with
eyes or any other sensitive part of
the body. Remember that batteries
contain oxyhydrogen gas and are
extremely explosive. Short circuits,
naked flames or sparks in the
vicinity of a battery may cause a
powerful explosion resulting in
personal injury and material damage.
Caution!
Use protective goggles when
working on batteries.
J0008268