Table of Contents
Advertisement
14
Leave the standing wooden block in place until
the spare wheel is fitted
15
Remove the wheel bolts completely
16
Lift off the wheel
Lower the axle by first lowering it onto the standing
wooden block. Then screw down the adjustable part of
the jack and lift the axle sufficiently to remove the
standing wooden block. Lower the axle completely.
Raising the rear axle on all wheel drive trucks
1
Chock the wheel that is to remain on the ground
2
Ensure that the brake is not applied to the wheel
that is to be removed
3
Undo the wheel nuts a couple of turns
4
Take out the wooden blocks that are kept in the
cab
5
Place the jack under the rear axle
6
Screw up the jack until it makes contact with the
axle casing
7
Raise the rear axle with the jack
8
Put the large wooden block under the axle casing
9
Lower the axle so the axle casing rests on the
standing wooden block
Maintenance 599
J7009730
J7009729
J7009731
Advertisement
Table of Contents
