Table of Contents
Advertisement
Setting the desired temperature
• Open all the ventilation nozzles
• Turn on the fan (4)
• Set desired air distribution (2)
• Set desired cooling or heating (1)
Remove mist and ice from windows
• Open all the ventilation nozzles
• Set the fan to the highest possible speed
• Set the air distribution to defroster
• Set the temperature to maximum heat
In AUT/defrost mode with cold temperatures, the
windscreen can become so hot that snow smoke melts
on it. This can cause the wiper blades to freeze to the
windscreen. Set the air distribution to the floor only.
Clean the inside of the windscreen with a normal
window cleaning fluid to reduce the risk of misting up.
Clean more frequently if someone smokes in the cab.
With cold outdoor temperatures, fogging and ice can
occur on the side windows. To avoid this, close the
inner panel nozzles and aim the side nozzles at the side
windows.
Cab 327
J8011876
J8011877
Advertisement
Table of Contents
