Table of Contents
Advertisement
Information display
40
Symbols for air suspension
Symbol
Axle load distribution 70%
CHECK THE AIR SUSPENSION
AT THE NEXT STOP
Status symbols
Status symbols are shown in the lowest row of the
display.
Symbol
Meaning
Air intake heating or air intake
heating fault
Meaning
The control button is set
to manual control or
adjustment of ride height.
If the control button is in
the centre position the air
suspension is in locked
position.
With "optimise traction",
the axle load distribution
is shown in the display.
Truck not in drive
position.
There is an air suspension
malfunction.
Symbol
Action
Select ride height
Note! Drive very carefully when the symbol is
displayed.
Check whether the air suspension is locked:
Turn the ignition key to the stop position (0)
and then back to the drive position (I).
If the symbol remains on the display the air
suspension is locked. See section "Air
suspension in locked position", page 628.
None. The message disappears when optimal
load distribution has been achieved.
Check that the control button is in the drive
position and wait until the truck reaches the
correct drive height.
Note! Drive very carefully when the symbol is
displayed.
A signal will sound if the speed is too high. If
a bellows is punctured, drive, at not more than
30 km/h, to a Volvo workshop, or contact
Volvo Action Service.
Check whether the fault is active at the next
stop: Turn the ignition key to the stop position
(0) and then back to the drive position (I). If
the message remains in the display, the fault is
active. See section "Air suspension in locked
position".
Meaning
LCS
Lane Change Support
active
Advertisement
Table of Contents
