Table of Contents
Advertisement
456 Dynafleet
3
After the greeting you can begin to work with the
system.
Shutting off the system — stand by
When the key is turned to 0, the system goes to the
standby mode. The screen shuts off and drops down if
it is not already down. The system continues to log
data when it is in the standby mode. After 2 hours (or
some other time decided by the office) in standby
mode, the system goes to a rest mode and stops
logging data. The system can thereafter be woken up
by an SMS, e.g. with temperature logging or location
logging (the system is woken up by GSM
communication).
The system is shut down completely only when the
main switch is turned off. In this state, Dynafleet
cannot receive GSM communications.
Transferring data
The data collected and saved in the system is
transferred to the fleet office where it is compiled and
documented. Information is transferred to the office
via the GSM network.
Caution!
Wait for 3 minutes after you have
stopped driving before you switch
off the main electrical supply,
otherwise data can be lost. Read
more about how you switch off
the main electrical supply in the
"Driver instructions" section.
Advertisement
Table of Contents
