Table of Contents
Advertisement
102 Information display
Keep the "SELECT" button pressed in for at least 3
seconds. Enter password, workshop password 2, see
the section Entering password. Mark, using ▲ and ▼,
if resetting is to be done. Confirm with "SELECT".
The display shows a confirmation that resetting has
started.
Numeric language, general
The instructions describe how the numeric language is
constructed and how it functions. Only the most
important menus and messages are described.
Display control stalk
Manual communication with the displays is achieved
with the control stalk on the right-hand side of the
steering wheel. The following commands are
available:
1
"Esc" is used to return to the previous menu and
to discontinue a setting/operation.
2
"SELECT" confirms a selection or a character
3
"▲" moves the cursor up and is used when
setting numbers/letters
4
"▼" moves the cursor down and is used when
setting numbers/letters
Service alarm
-- km
Advertisement
Table of Contents
