Table of Contents
Advertisement
366 Refrigerator
low earlier. Start the engine to generate a voltage boost
that automatically resets the voltage monitor.
Tilting the cab
Before the cab is tilted, the refrigerator should be
emptied of its contents and switched off.
Cleaning
Clean the refrigerator with a cloth with lukewarm
water and ordinary washing-up liquid. Make sure that
it does not force water into the gasket or into the
switch. Then dry with a dry cloth. Clean the
refrigerator both inside and outside at regular intervals
or as soon as it becomes dirty.
Defrosting
The moisture in the air can cause ice to form on the
refrigerator walls, which reduces the refrigerating
capacity. Defrost in good time by taking out all food
and putting it another refrigerator or freezer
compartment so that it keeps cold. Turn off the
refrigerator and leave the door open. When the ice
melts, most of the water runs out through the draining
hole in the rear centre of the refrigerator. Check that
the draining hole is not blocked. Then dry up the
remaining water thoroughly. Clean with a cloth with
lukewarm water and ordinary washing-up liquid, and it
is ready for use.
Interior lighting
The refrigerator has interior lighting which lights up
automatically when the door is opened. The lamp is
replaced by releasing the entire lighting assembly with
a twist to the left. The lamp is type C5W 24V SV 8.5.
Advertisement
Table of Contents
