Table of Contents
Advertisement
604 Maintenance
Cab tilt pump
Oil recommendations
Cab tilt pump
Checking the oil level
Check the oil level with the cab in the driving position.
1
To check the oil level in the cab tilt pump, the
panel in front of the foot step must be removed
2
Place the pump rod for the cab tilt pump in its
rearmost position
3
Check that the oil level for the cab tilt pump is in
the centre of the level glass (B)
4
Top up with oil as necessary. Filler plug at (A)
The oil only needs to be changed in connection with
repairs.
Central lubrication
The central lubrication provides automatic lubrication,
which would otherwise be done at service intervals.
The advantages of this is that you get a more even
lubrication at all locations and the service occasions
are fewer.
The lubrication takes place during driving at 9 hour
intervals. The lubrication is also activated if the
vehicle has been stationary for more than 48 hours.
Manual lubrication
The central lubrication can be activated manually with
a switch under the pump's plastic cover on the main
unit.
If in doubt of the function of the central lubrication,
check the fuse and do manual lubrication.
Oil grade
Hydraulic oil BLV
Oil change
Only in connection with
repairs.
J1007364
Advertisement
Table of Contents
