Raise the spare wheel
First check that the tensioning band
• is mounted
• is complete, including the seam
• has a knot in the roller
• is properly coiled on the roller
Tighten the band if necessary.
If the vehicle has a side underrun guard or chassis
skirt, use the inner hole (A) on the holder.
Lay the wheel straight under the holder. Do not pull it
in with the winch.
Tighten all four nuts to 400 Nm.
A crank for lifting up the wheel, and sleeve for
tightening the nuts are in the vehicle's tool equipment.
External equipment 495
J0010181
J0010183