Table of Contents
Advertisement
428 Radio/CD
2
Push Up button or Down button until
"ADVANCE" is displayed.
3
Push the "OK" button to enter Advance sub
menu.
4
Push Up button or Down button until "GUARD"
is displayed.
5
Push the "OK" button to enter.
6
Push the "OK" button to set Guard ON or OFF.
The user will be requested for the Anti Theft Code to
deactivate or activate Guard. The display will then
show "CODE 0000" with the first digit blinking. To
enter the code, do the following:
1
For the current (blinking) digit, turn the volume
knob until the right number is shown.
2
Press the power button to enter the digit. The
next digit will start to blink.
3
Repeat step 1 and 2 until all four digits has been
entered.
The user has three tries to enter the code. If these are
unsuccessful the radio will be locked for 60 minutes
until three new tries are allowed.
Tips and tricks
USB and MP3
• WMA and MP3 are the only formats readable by
the device.
• Playlist must be in .PLS or .M3U format.
• If the USB device does not work together with the
radio, please try to reconnect the USB device which
in some cases solves the problem.
• Some USB devices comes with extra software
installed which makes them not compatible with the
USB Mass Storage Device Class Standard. If this is
the case, formatting the USB device can sometimes
solve the problem.
Note!
Formatting the unit will erase all
data on the USB device, so make a
back-up of the data before trying this
action.
Advertisement
Table of Contents
