Table of Contents
Advertisement
356 Cab
Tilting back
1
Fit the socket spanner (3) into the valve of the
hydraulic pump (1).
2
Turn anticlockwise to the stop position. The
valve is open.
3
Get the pump rod.
4
Assemble the lever with the socket spanner (3).
5
Place the socket spanner in the pump (2).
6
Pump until the cab is locked in the driving
position.
7
Check that the lamp showing unlocked cab does
not light up when the engine is running.
8
Put the tools away.
Electric tilting
Tilting
1
Check that:
•
there is sufficient space in front of the cab.
•
the hand-operated parking brake is on.
•
the gear lever is in neutral position.
•
the doors are either completely open or
properly shut.
•
the cap on the clutch fluid reservoir
2
Fit the socket spanner (3) into the valve of the
hydraulic pump (1).
3
Turn clockwise to the stop position. The valve is
closed.
4
Turn the ignition to the radio position.
Open valve (drive position)
Control lamp for tilted cab.
J0008202
J0008208
J3014610
J8008489
Advertisement
Table of Contents
