Table of Contents
Advertisement
any particular value. This is just a check that they
move (e.g. that the drive stages and gauges
function).
4
Cancel the test with "Esc"
Display test
1
Select "Display test" with ▲ and ▼.
2
Confirm with "SELECT".
3
The whole display lights up for approx 3 seconds
after which it blacks out for 3 seconds. After this
a checkered pattern is displayed for 3 seconds.
The checkered pattern is then displayed inverted
for 3 seconds.
4
Cancel the test with "Esc"
Loudspeaker test
1
Select "Loudspeaker test" with ▲ and ▼.
2
Confirm with "SELECT".
3
The display shows the name of the sound at the
same time as the sound is activated for 10
seconds. Using ▲ and ▼ you can switch
between the different sounds.
4
Cancel the test with "Esc"
Part number
A list of the truck control units is shown in the menu
"Part Number". Both the control unit's hardware and
software numbers are shown.
1
Select part with ▲ and ▼.
2
Confirm with "SELECT".
3
Go back with "Esc"
Information display
71
Advertisement
Table of Contents
