Table of Contents
Advertisement
When travelling long distances the reception of a
locally sent program may be lost. In such case, using
the AF REG (regional) will allow the radio to tune to
other transmitters within that station.
When a radio search is performed the first time after
activating AF, the radio creates an internal list of
available stations. An additional search will be done
due to that list, which makes the search faster. The list
is sorted with respect to the stations' RDS codes and
the stations may not be tuned in frequency order in an
AF search.
AF Activation
To activate or deactivate AF, perform the following:
1
Push the "MENU" button.
2
Push Up button or Down button until "AF" is
displayed.
3
Select the AF status by pressing the "OK" button.
When AF is active, the display shows the AF icon.
Traffic Announcement (TA) and News
This feature allows the radio to play traffic or news
announcements even if the radio is in CD mode. To
ensure that the message is heard, the volume will be
automatically adjusted to the highest of the three
following volume levels:
• Volume level 10.
• The present normal volume level.
• A retained TA/News volume level.
The TA/News volume is set by adjusting the volume
during a TA/News announcement. The radio will
retain this TA/News volume setting.
Traffic Activation
There are two ways to activate the Traffic function:
1
Push and release the information TA button.
OR
Radio/CD 409
Note!
If Traffic is active, then the AF
function will be active.
Advertisement
Table of Contents
