Mechanical tilting
Tilting
1
Check that
•
there is sufficient space in front of the cab.
•
the hand-operated parking brake is on.
•
the gear lever is in neutral position.
•
the doors are either completely open or
properly shut.
•
the cap on the clutch fluid reservoir is
properly closed.
2
Fit the socket spanner (3) into the valve of the
hydraulic pump (1).
3
Turn clockwise to the stop position. The valve is
closed.
4
Get the pump rod.
5
Assemble the lever with the socket spanner (3).
6
Place the socket spanner in the pump (2).
7
Pump until the cab has reached maximum tilt.
Cab 355
Warning!
Completely tilt the cab! It is not
permissible to work underneath a
cab which is not fully tilted. If the
cab cannot be completely tilted, a
suitable metal device must be
inserted to ensure that the cab
cannot fall back again. Never go
beneath or in front of a tilted cab.
J8008488
J0008203