152 Driving
The engine's cruise control uses the auxiliary brakes
for braking when the speed is 7 km/h above the set
speed. 7 km/h excess speed is installed at the factory
but can be changed to between 3 and 15 km/h. Depress
+ or - on the toggle switch to increase or decrease the
excess speed. For a short time the display will show at
what speed above the set speed the auxiliary brake will
begin to take effect.
When the speed is down to 4 km/h above the set
speed, the auxiliary brakes stop braking.
The truck can be braked manually with the lever in
positions 1-3, and returns to braking at the set speed
when the lever is moved to position A again.
Disengage the cruise control with braking by pressing
the accelerator or putting the lever in position 0.
Disengage the engine cruise control by pressing the
brake pedal or the clutch pedal.
Brake Blending
When the auxiliary brake lever is in position A, the
auxiliary brake is automatically applied together with
the normal brakes when the brake pedal is depressed.
J0010263
Put the lever in position A
ABS
ABS is a part of EBS and is completely automatic.