Rear axle with hub reduction
Change oil in the hub
Fill each hub first and then fill the remaining oil into
the rear axle casing. See "Oil recommendations" for
the correct oil volume.
The level mark must be horizontal when checking the
oil.
Maintenance 587
Note!
Oil can run down to the anti-roll bar
and spread out. Use a large vessel to
collect the oil. Place a piece of sheet
metal between the rear axle and the
anti-roll bar that the oil can run on to
when draining the rear axle. Clean
the anti-roll bar after the oil change
if oil has run onto it.
J4017800