Table of Contents
Advertisement
6
Turn the connector and release the wiring.
7
Untighten the clamp that holds
the gas discharge lamp and remove
the lamp.
8
Fit the new gas discharge lamp
and clamp it securely.
9
Turn the connector to secure it, and fit the
cabling.
10
Fit the cover over the gas discharge lamp
11
Move the headlamp back into place.
Maintenance 513
3
4
Note!
Gas discharge lamps contain
mercury and must not be thrown
away with garbage. Gas discharge
lamps must be left for recycling.
Note!
To not touch the glass of the gas
discharge lamp. Grease, oil and the
like evaporate from the heat of the
bulb and can damage the reflector.
Note!
Change both lamps on the same
occasion! This is to prevent the
lamps from having different tints.
1
2
J201684
Advertisement
Table of Contents
