Table of Contents
Advertisement
This setting gives the fleet owner the possibility to
choose an engine speed limit. If the engine exceeds
this limit, it will be registered, see section "Trip data".
1
Select "Engine speed (max)" with ▲ and ▼.
2
Confirm with "SELECT".
3
Enter a new engine speed limit (in rpm)
Set the first digit with ▲ and ▼
Step to the next digit using "SELECT"
Step backwards with "Esc"
4
Confirm the new engine speed limit with
"SELECT"
5
The message "Transfer complete" is shown
If the setting fails:
• Press "Esc" and try to do the setting one more time,
see point 1.
• If it still will not work, perform diagnostics of the
display and engine control unit, see section "Fault
diagnosis".
• Contact a workshop if necessary.
Speed (max)
Only accessible if correct password is entered.
This function makes it possible for the carrier to set a
road speed limit. If the truck exceeds this speed it is
registered, see section "Trip data".
1
Select "Speed (max)" with ▲ and ▼.
2
Confirm with "SELECT".
3
State a new speed limit
Set the first digit with ▲ and ▼
Step to the next digit using "SELECT"
Step backwards with "Esc"
4
Confirm the new speed limit with "SELECT"
5
The message "Transfer complete" is shown
If the setting fails:
• Press "Esc" and try to do the setting one more time,
see point 1.
Information display
65
Advertisement
Table of Contents
