Table of Contents
Advertisement
3
Enter Repeat Sub menu by pressing "OK" button.
4
Push Up button or Down button to choose
between All, Track and Folder.
5
Push "OK" button to activate the desired Repeat
mode.
Changing to another Folder on a CD
If the content of the CD is stored in folders, it is
possible to change folders directly. To do this, push
either the Up button or the Down button to move to the
next or previous album/folder respectively.
Scan a CD
When CD is scanned, the first 10 seconds of each track
is played. To activate Scan, do the following:
1
Press the "MENU" button.
2
Select "SCAN" by pressing"OK" button.
Scanning will stop if
1
The "ESC" or "OK" button is pressed. OR
2
All tracks are browsed through.
External audio input
There are three possible external audio input modes,
USB, iPod and Aux. A USB and an AUX device can
be connected and accessible at the same time.
However, if an iPod is connected the USB and the
AUX devices will be disabled as an available source.
USB Mode
The radio is designed to work with USB devices
formatted with the USB Mass Storage Device Class
standard. Other USB devices may still work with the
radio though. If a USB device doesn't work properly,
try reconnecting the device which may solve the
problem in some cases.
A USB device must be connected prior to operating in
this mode.
Radio/CD 413
Advertisement
Table of Contents
